 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 32-Lane 8-Port PCI Express(R) Switch 89PES32T8 Product Brief Device Overview The 89HPES32T8 is a member of the IDT PRECISETM family of PCI Express(R) switching solutions. The PES32T8 is a 32-lane, 8-port peripheral chip that performs PCI Express Packet switching with a feature set optimized for high performance applications such as servers, storage, and communications/networking. It provides connectivity and switching functions between a PCI Express upstream port and up to seven downstream ports and supports switching between downstream ports. High Performance PCI Express Switch - Thirty-two 2.5 Gbps PCI Express lanes - Eight switch ports - Upstream port configurable up to x8 - Downstream ports configurable up to x8 - Low-latency cut-through switch architecture - Support for Max Payload Size up to 2048 bytes - One virtual channel - Eight traffic classes - PCI Express Base Specification Revision 1.1 compliant Flexible Architecture with Numerous Configuration Options - Automatic per port link width negotiation to x8, x4, x2 or x1 - Automatic lane reversal on all ports - Automatic polarity inversion on all lanes - Ability to load device configuration from serial EEPROM Features Legacy Support - PCI compatible INTx emulation - Bus locking Highly Integrated Solution - Requires no external components - Incorporates on-chip internal memory for packet buffering and queueing - Integrates thirty-two 2.5 Gbps embedded SerDes with 8B/10B encoder/decoder (no separate transceivers needed) Reliability, Availability, and Serviceability (RAS) Features - Supports ECRC and Advanced Error Reporting - Internal end-to-end parity protection on all TLPs ensures data integrity even in systems that do not implement end-to-end CRC (ECRC) - Supports PCI Express Native Hot-Plug, Hot-Swap capable I/O - Compatible with Hot-Plug I/O expanders used on PC and server motherboards Power Management - Utilizes advanced low-power design techniques to achieve low typical power consumption - Supports PCI Power Management Interface specification (PCI-PM 1.1) * Supports device power management states: D0, D3hot and D3cold - Unused SerDes are disabled Block Diagram 8-Port Switch Core / 32 PCI Express Lanes Frame Buffer Route Table Port Arbitration Scheduler Transaction Layer Data Link Layer Transaction Layer Data Link Layer Transaction Layer Data Link Layer Multiplexer / Demultiplexer Phy Logical Layer Phy Logical Layer Phy Logical Layer Phy Logical Layer Multiplexer / Demultiplexer Phy Logical Layer Phy Logical Layer Phy Logical Layer Phy Logical Layer Multiplexer / Demultiplexer Phy Logical Layer Phy Logical Layer Phy Logical Layer Phy Logical Layer SerDes SerDes SerDes SerDes SerDes SerDes SerDes SerDes SerDes SerDes SerDes SerDes (Port 0) (Port 1) Figure 1 Internal Block Diagram (Port 7) IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. 1 of 2 (c) 2007 Integrated Device Technology, Inc. February 8, 2007 IDT 89PES32T8 Product Brief Testability and Debug Features - Ability to read and write any internal register via the SMBus Sixteen General Purpose Input/Output Pins - Each pin may be individually configured as an input or output - Each pin may be individually configured as an interrupt input - Some pins have selectable alternate functions Packaged in a 31mm x 31mm 500-ball BGA with 1mm ball spacing Processor Processor North Bridge Memory Memory Memory Memory Product Description x8 PES32T8 Utilizing standard PCI Express interconnect, the PES32T8 provides the most efficient fan-out solution for applications requiring high throughput, low latency, and simple board layout with a minimum number of board layers. It provides 16 GBps (128 Gbps) of aggregated, full-duplex switching capacity through 32 integrated serial lanes, using proven and robust IDT technology. Each lane provides 2.5 Gbps of bandwidth in both directions and is fully compliant with PCI Express Base specification 1.1. The PES32T8 is based on a flexible and efficient layered architecture. The PCI Express layers consist of SerDes, Physical, Data Link and Transaction layers. The PES32T8 can operate either as a store and forward or cut-through switch and is designed to switch memory and I/O transactions. It supports eight Traffic Classes (TCs) and one Virtual Channel (VC) with sophisticated resource management to enable efficient switching and I/O connectivity. x4 PCI Express Slots x4 x8 I/O 10GbE x8 I/O 10GbE I/O SATA I/O SATA Figure 2 I/O Expansion Application 8-port 7-port 6-port 5-port 4-port PCIe x8 PCIe x8 PCIe x8 PCIe x8 x8 upstream PES32T8 PES32T8 PES32T8 PES32T8 x4 x4 x4 x4 x4 x4 x8 x4 x4 x4 x4 x8 x8 x4 x4 x8 x8 x8 PCIe x4 X4 upstream PES32T8 x4 x4 x4 x4 x4 x4 x4 Figure 3 Configuration Options CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES: 800-345-7015 or 408-284-8200 fax: 408-284-2775 www.idt.com for Tech Support: email: ssdhelp@idt.com phone: 408-284-8208 2 of 2 February 8, 2007 |
Price & Availability of 89PES32T8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |